Well made with good material. suitable for the right side of the table saw and the left side, but must be taken apart and then adjusted to fit, can be used to clamp wood material on the table top, but only if the fence has a T-slot for mounting. You can see how to adjust the Guide Wheel on YouTube.

Well made with good material. suitable for the right side of the table saw and the left side, but must be taken apart and then adjusted to fit, can be used to clamp wood material on the table top, but only if the fence has a T-slot for mounting. You can see how to adjust the Guide Wheel on YouTube.

Well made with good material. suitable for the right side of the table saw and the left side, but must be taken apart and then adjusted to fit, can be used to clamp wood material on the table top, but only if the fence has a T-slot for mounting. You can see how to adjust the Guide Wheel on YouTube.

• 
• 
• 

• 
• 
• 

Rotate left Rotate right

Very satisfied with this tool, chiefly useful to cut thin pieces but also to ensure tight contact of the wood with the guiding rail of the saw.
Does this job perfectly and avoid possible kickbacks.
To be noted : the wheels are only rotating one way and are delivered as clockwise. If, as in my case, you intend to use it on the left side of the blade, simply disassemble the upper plate and overturn the wheels to have them anticlockwise.
They are made for that since they display measures (metric) on both sides. Excellent.

Very satisfied with this tool, chiefly useful to cut thin pieces but also to ensure tight contact of the wood with the guiding rail of the saw. Does this job perfectly and avoid possible kickbacks. To be noted: the wheels are only rotating one way and are delivered as clockwise. If, as in my case, you intend to use it on the left side of the blade, simply disassemble the upper plate and overturn the wheels to have them anticlockwise. They are made for that since they display measures (metric) on both sides. Excellent.

Very satisfied with this tool, chiefly useful to cut thin pieces but also to ensure tight contact of the wood with the guiding rail of the saw. Does this job perfectly and avoid possible kickbacks. To be noted: the wheels are only rotating one way and are delivered as clockwise. If, as in my case, you intend to use it on the left side of the blade, simply disassemble the upper plate and overturn the wheels to have them anticlockwise. They are made for that since they display measures (metric) on both sides. Excellent.